CRM Mitchell1 2020-11-04T23:01:55+00:002011 GMC Sierra CRM Mitchell1 2020-11-04T23:01:55+00:00
- Passlock MODULE – Remove & Replace – 4D Pickup Extra Cab Door Control Module – [Includes: Programming.]
- Testing as required to set a course of diagnostic testing and repair.
- THE TAG LIGHTS HAVE BEEN RIGGED. IT NEEDS 2 194 BULBS, ONE LIGHT HOUSING, ONE LIGHT ELECTRICAL SOCKET, AND CLEAN UP ELECTRICAL CONNECTIONS AND REMOVE EXCESS WIRES.
- Visual, interior partially disassembled. Wires cut, spliced, etc under the dash. Battery is missing. Roach infestation. Seats torn. Exterior has heavy damage. Install a loaner battery. Cleared multiple trouble codes. Bcm B1380 hard fault returns immediately, researched. Found 2amp DLIS fuse #35 blown. Replaced 2a fuse. module has power, ground , and is connected to the network but no tech2 communication, replaced module, still no communication. Fuse blown again. Located a blue non oe wire connected to a pink oe wire. Suspect this as the reason for the blown fuse. Replaced fuse, it isnt blown. After still having no communication, and several hours of checking, we found the terminals in the theft module connector to be intermittant. Needs a connector to proceed. Replaced connector, which established communication. Now we were able to connect to Gm tis2web and program and learn the immobilizer. Vehicle starts and runs. Has traction control warning lights.
- WITH RESETS
- Freight/Shipping –
ROBERTO C. gave our service a 5 star review on 11/3/2020